一分快三在线稳定计划版

Welcome to Liaocheng Longtai Laser Equipment Co.,Ltd official website!

Optical fiber cutter
Navigation
Contact
Hot Line
15562882005
Fax:0635-6157577
Address:中国山东省聊城市 Liaocheng, Shandong, China
Location:主页 > English > News > News information >
Some skills of using fiber laser cutting machine
Auther: Pubdate:2018-11-17
  Fiber laser cutting machine is a very convenient machine to use, but if you can master some skills and methods when using this machine, it may be able to effectively improve the efficiency of the machine. Many worker friends may be the first time to use such a machine, so there are many places they don't know when they first use it. In this case, you can first look at the machine's manual, which describes the method of using the machine in detail. Please be sure to follow the rules of the manual. To make this machine, use it for a few days according to the range of cutting materials specified in the use manual, so as to ensure that the machine and equipment can operate normally for a long time. Here are some tips for using this machine.
 
laser
 
  The first skill in the use of optical fiber laser cutting machine is that there is a double focal length laser cutting head on the machine, which will emit laser for cutting, so the laser head should not be long-term alignment with the material to be cut, otherwise it may lead to material damage, or lead to cutting head damage. Bad. The second skill is to ensure that the machine can be used for a long time. It is suggested that the machine should be simply maintained and inspected after six months of use. If problems arise during the inspection process, they should be dealt with properly. Do not use the machine until the problems have been solved. After six months' maintenance check, the accuracy of the machine will be improved, and the quality of cutting can be improved. The third thing to note is that the use of this machine requires a week of dust removal, the dust and dirt inside the machine are all cleaned up, so that the machine can run with a higher degree of accuracy. The fourth technique is that there is a cutting machine steel strip on the machine. The steel strip may loosen after a long period of time. Then the steel strip should be tightened before each use, so that there will be no problems in the use process.
 
  In addition, this kind of machine should be cleaned and maintained everyday, such as cleaning the appearance of the machine, not leaving a lot of impurities or dirty things outside the machine, and adding lubricant regularly in the machine, so that oil and lubricant can be used. Enough to ensure that the equipment can be used properly, if it is found that there are impurities in the lubricating oil, then it is necessary to pour out the lubricating oil and be honored to add the lubricating oil without impurities.